RANCANG BANGUN TELEPON TESTER VERSI 2.0

Authors

  • Indra Kumala Sari
  • Maya Pitaloka
  • Nonot Harsono

DOI:

https://doi.org/10.32764/saintekbu.v1i2.77

Abstract

The telephone set which is daily used , could get a failure  any time. So it’s introduced a peripheral that could determine which parts of telephone gets malfunction. It is called a telephone tester which checks four parts of telephone circuit, they are ringer circuit, microphone and speaker of  handset, and DTMF ( Dual Tone Multi Frequency ) keypad. In this final project we made  a Telephone Tester Version 2.0 with the same function of telephone tester before ( Version 1.0). The design of this telephone is basically different from first telephone tester with a better performance.

In manufacturing the peripheral,  four separated circuits are used to determine the failure of a telephone set. On the circuit of ringer tester, IC 555 is used to generate ring tone with time period is 1s ‘on’ and 2s ‘off’; on the handset’s microphone tester circuit, OP-AMP 741 is used; on circuit of handset’s speaker tester, Wien oscillator ( f = 400 Hz) is used as tone generator; and on the DTMF keypad tester circuit, MT 8870 IC DTMF Receiver and DT-51 microcontroller are used with LCD ( Liquid Crystal Display ).

With this peripheral, we could certainly know the malfunction parts of telephone set, so the repairement could be done immediately.

Keywords: ring tone, microphone, speaker, DTMF keypad, IC 555, IC 741, MT 8870, microcontroller DT51, oscillator Wien, LCD ( Liquid Crystal Display ).


Downloads

Download data is not yet available.

Downloads

Published

2016-09-13

How to Cite

Sari, I. K., Pitaloka, M., & Harsono, N. (2016). RANCANG BANGUN TELEPON TESTER VERSI 2.0. SAINTEKBU, 1(2). https://doi.org/10.32764/saintekbu.v1i2.77

Issue

Section

Articles

Most read articles by the same author(s)