Analysis of Downtime Problems on Elevator Machine at PT. Santosa Utama Lestari using Tree Diagrams

##plugins.themes.academic_pro.article.sidebar##

Published Jan 9, 2025
https://doi.org/10.32764/saintekbu.v15i01.3258
Download
PDF
Statistic

Downloads

Download data is not yet available.
Vol. 15 No. 01 (2023): Vol. 15 No. 01 January 2023

##plugins.themes.academic_pro.article.main##

Ismi Mashabai
Universitas Teknologi Sumbawa
Andi Mustika Irahayu Asran
Universitas Teknologi Sumbawa

Abstract

Downtime is a condition in which the machine stops operating not on scheduled stops but due to a disturbance that occurs on the machine, so the machine will be idle until the machine has been repaired or is not in a state of disturbance. Downtime is when production equipment is not functioning due to a sudden inspection and repair of damaged equipment. Elevators can raise the material to a height of up to 50 meters; the capacity can reach 50 ????3/hour. The construction can reach a vertical position. The working principle of this tool is to move the material vertically by placing the material in buckets which are linked by a chain or belt at a certain distance which rotates on the pulley so that the bouquet can move vertically. This study uses the tree diagram method to analyse downtime problems by applying the 5 M + 1E technique.

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

How to Cite
Mashabai, I., & Irahayu Asran, A. M. . (2025). Analysis of Downtime Problems on Elevator Machine at PT. Santosa Utama Lestari using Tree Diagrams. SAINTEKBU, 15(01), 9–14. https://doi.org/10.32764/saintekbu.v15i01.3258

References

  1. Ahmadi Noor. (2017). Analisis Pemeliharaan Mesin Blowmould Dengan Metode RCM Di PT. CCAI. Jurnal Optimasi Sistem Industri. Jakarta Selatan. Universitas Pancasila
  2. Fawas Novianda. (2021). Peran Penyuluh Pertanian terhadap Tingkat Produksi Usahatani Jagung. Departemen Sosial Ekonomi Pertanian. Sumedang. Universitas Padjadjaran.
  3. Ilyas Rory. (2018). Konstruksi Dan Manufaktur Perancangan Alat Elevator Pada Pabrik Kelapa Sawit. Universitas Muhammadiyah. Sumatera Utara.
  4. Mustaghfiroh. (2020). Konsep Merdeka Belajar Perspektif Aliran Progresivisme Jhon Dewey. Jurnal Study Guru dan Pembelajaran. 3(1). 141-147
  5. Pangaribuan Omry. (2022). Penenentuan Frekwensi Pemeriksaan Yang Optimal Untuk Meminimumkan Downtime Pada Mesin Tarik Pt.Growth Sumatra Industry Medan. Jurnal Sains dan Teknilogi ISTP. Institut Sains Dan Teknologi. Medan.
  6. Pasta Ikhwana. (2015). Tanggap Pertumbuhan Dan Hasil Tanaman Jagung Manis (Zea Mays L. Saccharata) Pada Aplikasi Berbagai Pupuk Organik. Universitas Tadulako. Palu.
  7. Rahmania Tiara. (2016). Perbaikan Sistem Perawatan Mesin Pada PT Xyz. Jurnal Sistem Teknik Industri. Universitas Sumatera Utara. Medan.
  8. Sudana Oka. (2017). Implementasi Diagram Tree pada Rancang Bangun Sistem Informasi Bebayuhan Oton Berbasis Web. Bali. Universitas Udayana
  9. Utami Nadia. (2021). Analisis Kebutuhan Dan Manajemen Pemeliharaan Elevator Gedung Kementrian Dalam Negeri Republik Indonesia. Jawa Barat. Universitas Gunadarma
  10. Zakariya Yuza. (2020). Pengendalian Mutu Produk Air Minum Kemasan Menggunakan New Seven Tools (Studi Kasus di PT. DEA). Jurnal Sains Dan Teknologi. Madura. Universitas Trunojoyo Madura.